SHAFTSBURY VT-7A

STP FPAV(54) Shaftsbury

District paving on VT 7A from MM 1.06-4.1.

Project Location: Work will begin at the intersection of VT Route 67 and VT Route 7A and will continue northerly along VT Route 7A to just north of its intersection with Valley View Road.

Project Description: Work on this project will consist of milling the pavement to a 1.5” depth, spot shimming and surface prepping, then paving with a 1.5” lift of Type IVS wearing course pavement. Additionally, some guardrail work will be performed to repair and replaced damaged sections to bring full runs into compliance with the current standards. Shoulder berms that have built up will be removed to facilitate better drainage from the road surface, and some ditching work may be performed to further aid in drainage.

The corridor will be evaluated for the installation of Centerline Rumble Strips (CLRS). CLRS will be installed where the speed limit is 45 MPH or greater, the pavement width is 14 feet in both directions, and the traffic volume exceeds 1500 vehicles per day. The CLRS will be stopped at Town Highway intersections, and anywhere that a residence falls within 100 feet of centerline. In these cases, the CLRS will be stopped and resumed 100 feet from either corner of the residence.


Contact Information

**Please note: Contractors are to direct all inquiries to Contract Administration during project advertisement.

VTrans Project Manager
Matthew Bogaczyk
(802) 793-5321
matthew.bogaczyk@vermont.gov

VTrans Resident Engineer
Christopher Achilles
(802) 279-8989
chris.achilles@vermont.gov

Contact VTrans