STOCKBRIDGE-ROCHESTER VT-100

STP FPAV(42) Stockbridge

Paving along VT 100 from Stockbridge MM 1.967 to Rochester MM 6.055.

Project Location: Beginning on VT Route 100 in the Town of Stockbridge, at mile marker 1.967 (just after the intersection of VT-107/VT-100) and extending northerly for 9.201 miles and ending in the Town of Rochester at mile marker 6.055 (just north of the intersection of Beans Bridge Rd/VT-100).

Project Description: Work on this project will consist of milling the pavement to a 1.5” depth, spot shimming and surface prepping, then paving with a 1.5” lift of Type IVS wearing course pavement. Additionally, some guardrail work will be performed to repair and replaced damaged sections to bring full runs into compliance with the current standards. Shoulder berms that have built up will be removed to facilitate better drainage from the road surface, and some ditching work may be performed to further aid in drainage.

The corridor will be evaluated for the installation of Centerline Rumble Strips (CLRS). CLRS will be installed where the speed limit is 45 MPH or greater, the pavement width is 14 feet in both directions, and the traffic volume exceeds 1500 vehicles per day. The CLRS will be stopped at Town Highway intersections, and anywhere that a residence falls within 100 feet of centerline. In these cases, the CLRS will be stopped and resumed 100 feet from either corner of the residence.


Contact Information

**Please note: Contractors are to direct all inquiries to Contract Administration during project advertisement.

VTrans Project Manager
Matthew Bogaczyk
(802) 793-5321
matthew.bogaczyk@vermont.gov

VTrans Resident Engineer
Thomas Chase
(802) 498-8250
tom.chase@partner.vermont.gov

Contact VTrans

The Vermont Agency of Transportation is committed to ensuring accessibility and digital accessibility for all. If you need language assistance, reasonable accommodation, or alternative format, please email AOT Factsheet Support.